HP Printer Error Code e3 [How to Fix]

In this article, you will learn how to fix the HP printer error code e3 within minutes.

Solutions to the HP Printer Error Code e3

The HP printer error code e3 occurs when the carriage in your printer is jammed. You can resolve this error using any of the solutions below.

Carry out the solutions accordingly. After carrying out each solution, check if the HP printer error code e3 is resolved before moving to the next solution.

If your HP printer is displaying any other HP printer error, read this: HP Printer Errors and Solutions [Detailed] to learn how to resolve the error.

1. Check the Carriage Path for Obstructions

There might be some obstructions or loose paper restricting the carriage from moving. Therefore, such obstructions need to be located and removed.

How to Check the Carriage Path for Obstructions

Follow the steps below to check the carriage path for obstruction:

Step 1: Turn your HP printer off.

Step 2: Unplug the power cable from the printer.

Step 3: Open the access door to allow you to reach the carriage.

Step 4: Look for anything that might be obstructing the carriage path.

Step 5: If you find any obstructions, remove them carefully from the printer.

Step 6: If your carriage comes with a latch, press it down gently to ensure it is locked in place.

Note: For HP Ink Tank Printers, if you discover that the latch is already secured, don’t press it down. You could damage your printer if you do so.

Step 7: If you discover that the carriage isn’t secured in its place, slide it from side to side and then remove any obstructions you find.

Note: You shouldn’t move the carriage forcefully if it is secured. You could damage your printer if you do so.

Step 8: Close the access door.

Step 9: Plug the power cable into your printer.

Step 10: Turn your HP printer on.

2. Reset your HP Printer

To reset your HP printer, click on this link: HP Printer Errors and Solutions – HP Printer Error Do Not Use Setup Cartridges and follow the instructions under the “Reset your HP printer” subsection.

3. Service your HP Printer

If none of the steps above resolves the issue, you need to contact HP support. They will fix a date for either a repair or a replacement.

HP Printer Error Code e3 FAQs