HP Printer Error e8 [How to Fix]

This article will provide you with 4 solutions to the HP printer error e8.

HP Laserjet 1020 Black & White Laser Printer Q5911A

Causes of the HP Printer Error e8

The HP printer error e8 is often caused by the following:

i. The printhead carriage is unable to reach the right side of the printer

ii. The springs at both ends of the carriage are disoriented

iii. An unlocked cartridge is covering the carriage

Solutions to the HP Printer Error e8

To fix the HP printer error e8, try the solutions below:

Solution 1

Step 1: Raise the printer’s scanner cover.

Step 2: Raise the scanner head so that you can comfortably see what’s underneath.

Step 3: Check if any bits of dust, paper, or foreign objects are in the area.

Step 4: If you find any of such objects above, remove them.

After doing the steps above, check if the HP printer error e8 has been cleared. If the error remains, move to solution 2.

Solution 2

Step 1: Raise the printer’s scanner cover.

Step 2: Raise the scanner to the right and ensure it is underneath the scanner cover.

Step 3: With a lint-free cloth, clean the encoder strip gently.

After doing the steps above, check if the error has been cleared. If the error remains, move to solution 3.

In this article: HP Printer Errors and Solutions [Detailed] we provide solutions to other HP printer errors.

Solution 3

This solution works when the printhead is out of its position. To fix this error, do the steps below:

Step 1: Turn off your HP printer.

Step 2: Disconnect the cable (power, USB, Ethernet) from your printer, computer, and wall outlet.

Step 3: Let the printer cool down for about 10 minutes.

Step 4: Open your HP printer and align the printhead back into its rightful position.

Step 5: Turn on your HP printer.

Check if the error has been resolved. If the error persists, move to solution 4.

Solution 4

Step 1: Disconnect the power cable from your HP printer.

Step 2: Disconnect the USB cable from your printer and PC.

Step 3:  Let the printer cool down for about 10 minutes.

Step 4: Moisten a soft lint-free cloth with water. Squeeze it well to remove excess water.

Step 5: Clean the printer’s scanner glass gently. Ensure that no liquid spills into the printer.

Step 6: Reconnect the cables (power and USB).

Step 7: Turn your Printer on.

HP Printer Error e8 FAQs

How do I Fix E8 Error on HP LaserJet M1136 MFP?

To fix the E8 error on HP LaserJet M1136 MFP, turn off your printer or unplug the power cable. Wait for about 30 seconds. Turn on your printer or plug the power cable back into your printer.

What is E8 Error in HP M1132 MFP?

E8 error in HP M1132 MFP occurs as a result of software irregularity, or a break in either the motor or scanner connection.

Furthermore, a worn-out part could lead to the occurrence of this error.

How do I fix e9 error on my HP printer?

To fix e9 error on your HP printer, you will need to follow the instructions on the ink system maintenance page.

We recommend that you click this link: How to Fix HP Printer Error e9. In that link, you will find detailed instructions on how to fix this error.