To fix the HP printer error code 0xc19a0003, do the following solutions.
Once you try a solution, check if the error is fixed. If it is, do not move to the next solution. However, if it isn’t resolved, move to the next solution until the error is resolved.
Table of Contents
1. Reset your HP Printer
To reset your HP printer, follow the instructions in this link: HP Printer Errors and Solutions – HP Printer Error Do Not Use Setup Cartridges under the “Reset your HP printer” subsection.
2. Clean your HP Printer’s Printhead
You can clean the printer’s printhead using the HP Inkjet Utility toolbox to fix the HP printer error 0xc19a0003.
How to Use the Inkjet Utility Toolbox to Clean your HP Printer’s Printhead
Follow the steps below to use this utility to clean your printer’s printhead:
Step 1: Open “Toolbox” to clean the printer’s printhead.
Step 2: Click on the option for “Printer Services”.
Step 3: Double-click on the tab labeled “Clean Print Heads”.
Step 4: Carefully read the instructions in the open dialog box.
Step 5: Click on “HP Inkjet Utility”.
Step 6: Right-click “Clean”.
Step 7: Follow the on-screen instructions to complete the process.
3. Clear Clutter within your HP Printer
How to Clear Clutter within your HP Printer
Follow the steps below to clear clutter within your HP printer:
Step 1: Turn on your HP printer.
Step 2: Remove your printer’s input tray.
Step 3: Remove every paper from the tray.
Step 4: Look for any paper that has been rolled in the print tray. If you find any, remove such paper.
Step 5: Remove every piece of paper found in the print tray.
Step 6: Look for any object that is hidden within your printer.
Step 7: Remove the power cord from the electric outlet supply. Remove other cables (USB, Ethernet, etc.) that are connected to your printer.
Step 8: Reattach the print paper tray.
Step 9: Open your printer’s cover and take out any bit of paper you find stuck within it.
Step 10: Check if there is any blockage in the printer’s duplexer area.
Step 11: Turn your HP printer on and allow it to remain idle for a bit to get it functional.
Step 12: Print out a “Configuration Page” to confirm that the printer error has been resolved.
We recommend that you read this article: HP Printer Errors and Solution [Detailed] to learn how to solve other HP printer errors.
4. Remove and Reinstall your HP Printer’s Cartridges
How to Remove and Reinstall your HP Printer’s Cartridges
To remove and reinstall your HP printer’s cartridges, do these steps:
Step 1: Turn your HP printer on.
Step 2: Open your printer’s cover.
Step 3: Ensure that the print carriages are in the middle of the printer.
Step 4: Take the cartridges out of your printer.
Step 5: Keep the printer’s cartridges on a sheet of paper.
Step 6: Clean the slow where the cartridges were taken out from.
Step 7: Reinstall the cartridges back into your HP printer.
Step 8: Close your printer’s cover.
The above solution should resolve the HP printer 8610 error code 0xc19a0003.
5. Check the Ink Levels – HP Printer Error Code 0xc19a0003
To check the estimated ink level of your HP printer, consult your user manual since the steps vary from model to model.
After checking the ink levels and you notice that they are low, you will need to replace your printer’s cartridge.
6. Reset your HP Printer Settings to Factory Defaults
To reset your HP printer settings to factory defaults, refer to the instructions we shared here: HP Printer Error Unable to Connect to Web Services – Restore your Printer to Factory Defaults.
7. Update the Driver of your HP Printer
To update the driver of your HP printer, go to the official HP website and download the latest printer driver for your printer. After downloading the driver, install it on your computer.
