In this article, you will learn how to fix the HP printer error 59.70 via any of the 3 solutions we’ve discussed below.
Table of Contents
Causes of the HP Printer Error 59.70
The HP printer error 59.70 could be caused by the following issues:
i. An error in the printer motor
ii. Missing Electronic Transfer Belt
iii. Incorrectly installed Electronic Transfer Belt
Solutions to the HP Printer Error 59.70
To fix the HP printer error 59.70, try the following solutions:
1. Run a power Cycle
How to Run a Power Cycle on your HP Printer
To run a power cycle on your HP printer, do the steps below:
Step 1: Turn off your printer.
Step 2: Discharge any leftover charge on the printer by pressing your printer’s power button.
Step 3: Wait a bit for your printer to cool down.
Step 4: Turn on your printer.
Step 5: Plug your printer’s power cord straight into an electric wall outlet. But ensure your turn off the outlet switch before you do this.
Step 6: Turn on your HP printer.
Step 7: Print a test page to confirm if the error is resolved or not.
If the HP printer error 59.70 remains, try the solution below.
Read this article: HP Printer Errors and Solutions [Detailed] to learn more about HP printer errors and how to solve them.
2. Cold Reset your HP Printer
How to Cold Reset your HP Printer
To cold reset your HP printer, do the following:
Step 1: Turn on your HP printer.
Step 2: The printer’s memory will begin counting as displayed on the printer’s control panel.
Step 3: Press down the printer’s green button.
Step 4: Press down the green button until the “Ready”, “Attention”, and “Data” lights flash at once and then become steady.
Step 5: Once the lights are steady, let go of the button.
Step 6: Scroll down the page until your get to “Cold Reset”.
Step 7: Choose “Cold Reset”.
Step 8: The reset should fix the error.
Step 9: Print a test page to confirm if the error is resolved or not.
If this solution doesn’t work, try the last one.
3. Run HP Print and Scan Doctor
To run HP Print and Scan Doctor, follow the steps we shared here: HP Printer Error Documents Waiting – How to Run HP Print and Scan Doctor.
HP Printer Error 59.70 FAQs
How do I fix Error 49.4 c02?
To fix the error 49.4 c02, do these solutions:
i. Turn off and then on your printer
ii. Clear the print queue
iii. Upgrade your printer firmware
In this article: HP Printer Error 49.4c02 [How to Fix], we discuss the solutions above and more in detail.
What does EI mean on HP printer?
EI (E1) on an HP printer is an error that occurs due to a paper jam in your printer or the loaded paper size does not match the setting for paper size.
In this link: How to Fix HP Printer Error e1, we provide solutions to this error.