The HP printer error 82.0180 eio 2 is one of the HP printer errors that users encounter. To fix this error, do the solutions provided in this article.
Table of Contents
Cause of the HP Printer Error 82.0180 eio 2
The HP printer error 82.0180 eio 2 indicates that your network card has an issue. The network card enables your HP printer to connect to a network (in most cases a LAN). Hence, the HP printer error 82.0180 eio 2 is a network-related error.
Solutions to the HP Printer Error 82.0180 eio 2
The following are solutions to the HP printer error 82.0180 eio 2:
1. Reset your Printer’s Network Card
As we said, the error occurs when the network card has an issue. Therefore, the first solution is to reset the network card to proper working conditions.
How to Reset your HP Printer Network Card
To reset the network card, do these steps:
Step 1: Press down the test button for just 5 seconds; not less and not more.
Step 2: Cold reset your device by unplugging the power cable from your printer and then press down the test button for 30 seconds while the wireless power cable is plugged in.
Ensure that you don’t press the test button longer than 30 seconds.
After resetting the network card, check if the error is resolved.
If the error persists, do the next solution.
In this article: HP Printer Errors and Solutions [Detailed], we provide solutions to a wide range of HP printer errors.
2. Take out the Printer’s Network Card
If resetting the network card doesn’t resolve the error, then you have to take the card out of your printer.
How to take out your HP Printer Network Card
To take out your printer’s network card, do these steps:
Step 1: Turn off your HP printer.
Step 2: Remove the power cable from the printer.
Step 3: Unplug the power cable from the electric wall outlet.
Step 4: Reconnect the power cable into the wall outlet directly.
Step 5: Reconnect the power cable to your printer.
Step 6: Your printer should power on automatically. If it fails to do so, turn it on manually.
Step 7: If you don’t see the error once your printer is done initializing, then the Eio slot is responsible for the error.
Step 8: Therefore, put the network card in the Eio slot.
Step 9: Check if your HP printer is working normally.
Step 10: If it fails to work, then the error is due to a hardware problem. Therefore, you need to reach out to HP Support for further assistance.