HP Printer Warning Lights on HP LaserJet P1505n and P1505 Printer Series [How to Fix]

In this article, we will discuss the meaning of HP printer warning lights on HP LaserJet P1505n and P1505 printer series and how to clear the warning lights.

HP P1505N Laserjet Printer

Table of Contents

All Lights are Turned off – HP Printer Warning Lights on HP LaserJet P1505n and P1505 Printer Series

This indicates that your printer is off. Therefore, you need to turn on your printer.

To turn on your printer, do the following steps:

Step 1: Connect the power cable to a wall outlet if it is not already connected.

Step 2: Plug the power cable into your printer if it is not already plugged in.

Step 3: Press your printer’s power switch to turn on your printer.

Turned-on Ready Light – HP Printer Warning Lights on HP LaserJet P1505n and P1505 Printer Series

This is an indication that your printer is in a ready state and will print any job that is sent to it. This is a normal printer condition that doesn’t require any action.

Blinking Go, Ready and Attention Lights – HP Printer Warning Lights on HP LaserJet P1505n and P1505 Printer Series

 This is an indication that your printer is initializing or canceling a job. This is a normal printer condition that doesn’t require any action.

Once the printer completes initialization or cancels the print job, the lights will return to normal.

Blinking Ready Light – HP Printer Warning Lights on HP LaserJet P1505n and P1505 Printer Series

This is an indication that your printer is receiving or processing data. If you want to cancel the current print job, press your printer’s “Cancel” button.

Blinking Ready Light and Turned on Attention Light – HP Printer Warning Lights on HP LaserJet P1505n and P1505 Printer Series

This is an indication that a manual feed error or a general error has occurred. To fix this error, press your printer’s “Go” button.

Blinking Attention Light – HP Printer Warning Lights on HP LaserJet P1505n and P1505 Printer Series

This occurs when any of the following happens:

i. Your printer’s print cartridge is not properly closed or is open.

ii. A paper jam has occurred.

iii. Your printer is out of paper.

To fix this issue, do the following solutions.

HP P1505N Laserjet Printer

1. Close your Printer’s Print Cartridge Door – HP Printer Warning Lights on HP LaserJet P1505n and P1505 Printer Series

To close your printer’s print cartridge door, do the following steps:

Step 1: Check your printer’s print cartridge door.

Step 2: Open your printer’s print cartridge door.

Step 3: Close your printer’s print cartridge door.

Step 4: Press down the printer’s print cartridge door to close it securely.

Check if the issue is resolved.

If the issue is resolved, stop troubleshooting.

If the issue is resolved, do the solution below.

2. Clear Paper Jam – HP Printer Warning Lights on HP LaserJet P1505n and P1505 Printer Series

To clear the paper jam in your printer, do the following tasks.

Caution: Don’t remove the jammed paper from your printer with sharp objects such as needle-nose pliers or tweezers. If you damage your printer with these objects, the warrant on your printer does not cover such damages. When pulling the jammed paper out of your printer, always pull it straight out instead of pulling it at an angle. Doing the latter can damage your printer.

Note: If toner spills on your clothes, do not wash them with hot water as that will set the toner permanently onto the fabric. Always wash toner-stained clothes with cold water.

1. Remove Loose Paper from HP LaserJet P1505n and P1505 Printer Series

Check your printer’s input tray, output tray, and priority feed slot for loose paper. If you find any, remove them from your printer.

Caution: Don’t remove the jammed paper now.

After removing the loose paper, do the next task.

2. Clear the Paper Jam from HP LaserJet P1505n and P1505 Printer Series

To clear the paper jam from your printer, do the following steps:

Step 1: Open your printer’s print cartridge door.

Step 2: Remove the ink cartridge from your printer.

Note: The process of opening the cartridge door and taking out the ink cartridge reduces the tension on the rollers within your printer. This, in turn, prevents the printer from getting damaged and makes it easier to remove the jammed paper.

Caution: Cover the ink cartridge with a sheet of paper to reduce the amount of light it is exposed to. This is important because exposure to a large amount of direct light can damage the ink cartridge. 

Step 3: Grasp the jammed paper with both hands at its most visible portion.

Step 4: Gently pull out the paper from your printer’s cartridge area.

Step 5: Check inside the printer for torn pieces of labels or paper. If you find any, remove them.

Step 6: Check if the paper is jammed in the printer’s input tray, output tray, and priority feed slot.

Step 7: If you find jammed paper in any of the areas mentioned above, hold the jammed paper with both hands at its most visible portion, and then gently pull out the paper from your printer.

Step 8: Reinsert the ink cartridge into your printer.

Step 9: Close your printer’s ink cartridge door.

After doing the above steps, do the next task.

HP Printer Paper | 8.5 x 11 Paper | Premium 32 lb | 1 Ream - 250 Sheets | 100 Bright | Made in USA - FSC Certified | 113500R

3. Reset your printer

To reset your printer, do the following steps:

Step 1: Turn off your printer by pressing the power button.

Step 2: Wait for 30 seconds.

Step 3: Turn on your printer by pressing the power button.

After resetting your printer, check if the issue is resolved.

If the issue is resolved, stop troubleshooting.

If the issue is resolved, do the solution below.

3. Reload Paper into your Printer – HP Printer Warning Lights on HP LaserJet P1505n and P1505 Printer Series

To reload the paper into your printer, do the following steps:

Step 1: Get a stack of paper of plain, white paper.

The paper stack shouldn’t have more than 250 paper sheets.

Step 2: Hit the paper stack on an even surface to align the paper edges.

Step 3: Slide the stack of paper into your printer’s main tray.

Ensure that the short edge faces the printer while the print side faces up.

Step 4: Adjust the paper width and length guides to rest against the paper stack.

Try to print a document.

If the document prints and the issue is resolved, then you need to stop troubleshooting.

If the document doesn’t print, then you need to service your printer.

To service your HP printer, you can either contact HP Customer Support to fix a repair date for the printer if your device is still under warranty: The repair is free for such printers. Furthermore, you will get a free replacement if the printer cannot be repaired.

You can still contact HP if your printer is no longer under warranty, but you will pay for the repair. However, contacting a local and reliable technician will be ideal.

Turned-on Go, Ready, and Attention Lights – HP Printer Warning Lights on HP LaserJet P1505n and P1505 Printer Series

When this happens, a fatal error has occurred on your printer. To fix this error, you need to reset your printer.

1. Reset your Printer – HP Printer Warning Lights on HP LaserJet P1505n and P1505 Printer Series

To reset your printer, do the following steps:

Step 1: Turn off your printer by pressing the power button.

Step 2: Remove the power cable from the wall outlet.

Step 3: Wait for 30 minutes.

Step 4: Reconnect the power cable to the wall outlet.

Step 5: Turn on your printer by pressing the power button.

Check if the error is resolved after doing the above.

If the error persists, then you need to service your printer.

You can read this article: How to Reset HP Printer [Detailed Guide] to learn about other resets that you can perform on your HP printer.

HP LaserJet Pro M15w Wireless Monochrome Printer, works with Alexa (W2G51A)

Red Toner Light and Turned on Ready Light – HP Printer Warning Lights on HP LaserJet P1505n and P1505 Printer Series

This is an indication the toner level is low. To resolve this issue, you need to replace the low toner cartridge with a new one. 

How to Replace Toner Cartridge in HP LaserJet P1505n and P1505 Printer Series – HP Printer Warning Lights on HP LaserJet P1505n and P1505 Printer Series

To replace the toner cartridge in your printer, do the following steps:

Step 1: Open your printer’s cartridge door.

Step 2: Take out the old cartridge from your printer.

Step 3: Take out the new cartridge from its packaging.

Caution: Hold both ends of the cartridge instead of the body to prevent the toner cartridge from getting damaged.

Step 4: Remove the sealing tape from the toner cartridge by pulling out the tab completely.

Step 5: Gently shake the cartridge back and forth to spread the toner within the cartridge.

Step 6: Insert the new cartridge into your printer.

Step 7: Close your printer’s cartridge door.

If replacing the toner cartridge does not resolve the issue, then you need to service your printer.

We recommend that you read this article: HP Printer Warning [Detailed Guide] to learn about other HP printer warnings that you might encounter when using your HP printer.

Blinking Red Toner Light – HP Printer Warning Lights on HP LaserJet P1505n and P1505 Printer Series

This occurs as a result of any of the following:

i. The toner cartridge is not correctly installed.

ii. The toner cartridge is not installed.

To resolve this problem, do the following solutions.

1. Reinstall the Cartridge Correctly – HP Printer Warning Lights on HP LaserJet P1505n and P1505 Printer Series

To reinstall the toner cartridge correctly, do the following steps:

Step 1: Lift your printer’s cartridge door.

Step 2: Take out the toner cartridge from your printer.

Step 3: Reinstall the cartridge into your printer.

Ensure that it is well-seated.

Step 4: Close your printer’s cartridge door.

Check if the issue is resolved.

If the issue is resolved, stop troubleshooting.

If the issue persists, do the next solution.

2. Install a New Cartridge – HP Printer Warning Lights on HP LaserJet P1505n and P1505 Printer Series

To install a toner cartridge into your printer, do the following steps:

Step 1: Open your printer’s cartridge door.

Step 2: Take out the new cartridge from its packaging.

Caution: Hold both ends of the cartridge instead of the body to prevent the toner cartridge from getting damaged.

Step 3: Remove the sealing tape from the toner cartridge by pulling out the tab completely.

Step 4: Gently shake the cartridge back and forth to spread the toner within the cartridge.

Step 5: Insert the new cartridge into your printer.

Step 6: Close your printer’s cartridge door.

If installing a new toner cartridge does not resolve the issue, then you need to service your printer.