In this article, we will provide you with solutions to the HP printer test page failed to print the parameter is incorrect error.
Table of Contents
HP Printer Test Page Failed to Print the Parameter is Incorrect [Reasons]
If you tried to print a test page on your HP printer and it failed because of an error message that says “the parameter is incorrect,” the reasons for this error include:
i. Temp folder permission issues.
ii. Temp folder has been moved to a different location from your C driver.
iii. Corrupted image files on the Windows system.
In this article: HP Printer Test Page [How To, Issues & Solutions], we discuss other HP printer test page issues not covered in this article.
HP Printer Test Page Failed to Print the Parameter is Incorrect [Solutions]
To fix the HP printer test page failed to print the parameter is incorrect error, do the solutions below:
1. Uninstall and then Reinstall your HP Printer – HP Printer Test Page Failed to Print the Parameter is Incorrect
There are different methods of uninstalling your HP printer from a Windows computer and we will share them with you.
Uninstalling your HP Printer from Windows Computer – HP Printer Test Page Failed to Print the Parameter is Incorrect
Use any of the methods below to uninstall your HP printer from your Windows computer:
Uninstall your HP Printer from Windows Computer Using Windows Settings
To uninstall your HP printer from your Windows computer using Windows settings, do the following:
Step 1: Open “Settings” on your Windows computer.
Step 2: Click on “Devices.”
Step 3: Select “Printers and Scanners.”
Step 4: Click on your HP printer from the installed devices list.
Step 5: Click on “Remove device.”
This should uninstall your HP printer from your Windows computer.
However, if your HP printer runs via third-party apps, you will need to do these additional steps:
Step 6: Go to “Settings” again.
Step 7: Click on “Apps.”
Step 8: Click “Apps and Features.”
Step 9: Select the third-party software.
Step 10: Click on “Uninstall.”
Uninstall your HP Printer from Windows Computer Using Windows Control Panel
To uninstall your HP printer from your Windows computer using the Windows control panel, do the following:
Step 1: Click on the search icon on the taskbar.
Step 2: Type “control panel” in the search field.
Step 3: Press the “Enter” key on your keyboard.
Step 4: Click on “Control Panel” from the search results.
Step 5: Click on “Hardware and Sound.”
Step 6: Click on “Device and Printers.”
Step 7: Right-click on your HP printer.
Step 8: Click “Remove device.”
This should uninstall your HP printer from your Windows computer.
However, if your HP printer runs via third-party apps, you will need to do these additional steps:
Step 9: Go to “Settings.”
Step 10: Click on “Apps.”
Step 11: Click “Apps and Features.”
Step 12: Select the third-party software.
Step 13: Click on “Uninstall.”
Uninstall your HP Printer from Windows Computer via Print Server Properties
To uninstall your HP printer from your Windows computer via print server properties, do the following:
Step 1: Go to “Settings.”
Step 2: Click on “Devices.”
Step 3: Click on “Print server properties” under the “Related settings” section.
You can also open the print server properties by opening the “Run” command by pressing the “Windows” and “R” keys on your keyboard. After that, type: “printui /s /t2” before pressing the “Enter” key on your keyboard.
All the installed printers will be displayed after doing step 3.
Step 4: Click on your HP printer.
Step 5: Click on “Remove.”
Step 6: Choose if you intend to remove the driver only or remove the driver and driver package.
Step 7: After making your selection, click “OK.”
Uninstall your HP Printer from Windows Computer via the Command Prompt
To uninstall your HP printer from a Windows computer via Command Prompt, do the following:
Step 1: Click on “Start.”
Step 2: Search for “Command prompt.”
Step 3: Run the Command Prompt as administrator.
Step 4: Type this command when the Command Prompt window opens: wmic printer get name
This command will display all the printers stored on the memory of your Windows computer.
Step 5: Press the “Enter” key on your keyboard.
Step 6: Type this command below but replace “Printer Name” with your HP printer name the way it is named in the devices list: printui.exe /dl /n “Printer Name”
Step 7: Press the “Enter” key on your keyboard.
Uninstall your HP Printer from Windows Computer via Registry Editor
To uninstall your HP printer from your Windows computer via Registry Editor, do the following:
Step 1: Press the “Windows” and “R” keys on your keyboard to open the Run command.
Step 2: Type this: regedit.exe
Step 3: Press the “Enter” key on your keyboard.
This action will open the Windows Registry Editor.
Step 4: Type this key in the File Explorer address bar to find linked printers: HKEY_CURRENT_USER\SOFTWARE\Classes\Local Settings\Printers\Roamed
Step 5: Now type this key in the address bar: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers
This action will display a list of printers to enable you to select your printer.
Step 6: Right-click on your HP printer.
Step 7: Click on “Delete.”
Reinstalling your HP Printer on Windows Computer – HP Printer Test Page Failed to Print the Parameter is Incorrect
To reinstall your HP printer on your Windows computer, do the steps below:
Step 1: After the uninstallation is complete, restart your computer.
Step 2: Add your HP printer.
For Windows 10
i. Open “Settings”.
ii. Click on “Printers & scanners.”
iii. Click on “Add a printer or scanner.”
Allow your Windows computer to search for available devices.
iv. Click on your HP printer after the search is complete.
v. Click on “Add device.”
For Windows 11
i. Open “Settings.”
ii. Click on “Bluetooth & devices.”
iii. Click on “Printers & scanners.”
iv. Click on “Add device.”
Allow your Windows computer to search for available devices.
v. Click on your HP printer after the search is complete to add it.
If the HP printer test page failed to print the parameter is incorrect error is not resolved after doing the above solution, try the next one.
2. Reinstall or Update your HP Printer Driver – HP Printer Test Page Failed to Print the Parameter is Incorrect
To update your HP printer driver, go to the HP Software and Drivers page and then enter the name of your HP printer before clicking “Submit”. Follow the instructions to update the printer driver.
If updating your printer driver does not resolve the HP printer test page failed to print the parameter is incorrect error, do the next solution.
3. Run the CHKDSK Scan – HP Printer Test Page Failed to Print the Parameter is Incorrect
To run the CHKDSK scan on Windows 10 and 11, do the steps above:
Step 1: Right-click the disk drive you intend to scan.
Step 2: Click on “Properties.”
Step 3: Select the tab labeled “Tools.”
Step 4: Click “Check” under the “Error checking” section.
If any error is detected, you will be requested to check your disk drive.
If there are no errors, this message will be displayed: “You don’t need to scan this drive.” If you desire, you can still choose to scan the drive. To do this, click “Scan drive.”
The scanning will begin and should be completed in about 5 minutes.
When the scan is complete, a message will be displayed to tell you if errors were found or not.
If the scan found no errors, this message will be displayed: “Windows successfully scanned the drive. No errors were found.”
If errors were found, this message will be displayed: “Restart your computer to repair the file system. You can restart right away or schedule the error fixing on next restart.”
You can run the CHKDSK scan via the command line. To do this, type: “chkdsk /f c:” and then press the “Enter” key on your keyboard.
You might have to restart your Windows computer.
4. Change the Temp Folder Permissions – HP Printer Test Page Failed to Print the Parameter is Incorrect
To change the Temp folder permissions, do the steps below:
Step 1: Press the “Windows” and “R” keys on your keyboard to open the Run command.
Step 2: Type this in the command box: %userprofile%
Step 3: Click “OK.”
Step 4: Open the folder labeled “AppData”.
If you can’t find this folder, show the hidden folders and files in File Explorer.
To show hidden folders and files in file explorer, do these:
- Go to your computer’s “Control Panel.”
- Click on “File Explorer Options.”
- Click on the tab labeled “View.”
- Choose the option “Show Hidden Files, Folders and Drives.”
- Click “Apply.”
- Close the Window.
Step 4: Open the folder labeled “Local.”
Step 5: Find and right-click on the folder labeled “Temp.”
Step 6: Click on “Properties.”
Step 7: Click on the tab labeled “Security.”
Step 8: Choose the user profile from the box labeled “Group or usernames.” This action will allow you to see the permissions of the user profile.
Step 9: Check if there is a checkmark beside the option “Full Control” under “Allow.”
If there is a checkmark, then the user profile has full control and you don’t have to make any changes.
On the other hand, if there is no checkmark, then it means the user profile permission is limited. Therefore, you need to change the permission by continuing with the steps below.
Step 10: Click the button labeled “Edit.”
Step 11: Choose a user.
Step 12: Check the boxes you want to allow permissions for.
Step 13: Click “OK” when you are through allowing permissions.
Step 14: Apply your changes.
To change the permission for all files and subfolders within the temp folder, continue with the steps below.
Step 15: Go to the tab labeled “Security.”
Step 16: Click on the button labeled “Advanced.”
Step 17: Choose a user (your user profile).
Step 18: Check the box for “Replace all child object permission entries with inheritable permission entries from this object.”
Step 19: Click “Apply.”
Step 20: Click “OK.”
5. Reset your HP Printer to Factory Default – HP Printer Test Page Failed to Print the Parameter is Incorrect
To reset your HP printer to factory default, click this link: How Do I Reset my HP Printer Back to Factory Settings – How to Reset HP Printer and then follow the steps we shared.
6. Contact HP – HP Printer Test Page Failed to Print the Parameter is Incorrect
If none of the solutions above resolve the HP printer test page failed to print the parameter is incorrect error, then you should contact HP Customer Support for further assistance.
