When dealing with an HP printer supply problem after update, it’s easy to feel overwhelmed. Don’t worry, though. This article will guide you through resolving these issues in a simple, step-by-step manner. Remember, these issues are common and completely solvable.
Table of Contents
Solving HP Printer Supply Problem After Update
When your HP printer displays a supply problem after an update, it could be due to a variety of reasons such as the printer not recognizing the ink cartridges, print head, or toner. Here are some general steps to solve these problems:
Reset Your Printer
The first method to solve the HP printer supply problem after update is resetting your printer. Start by turning on your printer. Then, while the printer is still on, disconnect the power cord from the back of the printer and from the wall outlet.
Wait for about 60 seconds. Reconnect the power cord to the wall and to the printer. If the printer does not turn on by itself, turn it on manually. This process can reset the system inside the printer and remove any errors that might have occurred during the update.
Check Your Ink Cartridges, Print Head, or Toner
If resetting does not solve the problem, the next step is to check the supplies in question. Open your printer and inspect the ink cartridges, print head, or toner. Ensure they are correctly installed and not damaged. If any supplies are low or empty, replace them with new ones.
Also, cleaning the contacts of these components might help. Use a clean, lint-free cloth to gently clean the contacts. Avoid touching the nozzles or chips during the cleaning process.
Update Your Printer Firmware
Outdated firmware can sometimes cause an HP printer supply problem after update. Visit the official HP website and find the latest firmware for your printer model.
Download and install it. This could potentially resolve any compatibility issues between your printer and its supplies caused by the previous update.
Check out these other related articles…
HP Printer Problems After Windows 10 Update: Sure Solutions
HP Printer After Mac Update [Issues & Solutions]
HP Printer After Microsoft Update [Issues & Solutions]
HP Printer Not Recognizing Ink Cartridge After Eprint Update
Following an Eprint update, you might find that your HP printer is not recognizing the ink cartridge. This can be frustrating, but there are a few ways you can resolve this issue.
Reset Your Printer
The first solution to try is resetting your printer. Begin by turning the printer on. Then, while the printer is on, disconnect the power cord from the back of the printer. Wait for a minute before reconnecting the power cord.
If the printer does not turn on by itself, turn it on manually. Once your printer is on and ready, try printing a test page.
Clean the Ink Cartridge
If resetting your printer did not work, you could attempt to clean the ink cartridge. First, remove the cartridge from the printer.
Use a clean, lint-free cloth to gently clean the gold-colored contacts on the cartridge. Reinsert the cartridge and try printing a test page.
We recommend this article: HP Printer After Update [Issues & Proven Solutions] for further reading.
HP Printer Not Recognizing Print Head After Firmware Update
If you’re finding that your HP printer is not recognizing the print head after a firmware update, there are a few steps you can take to resolve this issue.
Reset Your Printer
The process for resetting your printer in this situation is the same as before.
Clean the Print Head
If resetting the printer didn’t work, it might be time to clean the print head. To do this, remove the print head from your printer.
Then, using a clean, lint-free cloth, gently clean the contacts on the print head. Replace the print head, making sure it’s securely installed. Try to print a test page.
Update Your Printer Driver
If your HP printer still isn’t recognizing the print head, the issue might be with your printer driver. Visit the official HP website and navigate to the support section. Here, you’ll be able to find the latest drivers for your printer model.
Download and install these drivers, following the prompts given. Once you’ve installed the new drivers, restart your printer and try to print a test page.
