If you are having an HP printer error code 0x83c0000a, we recommend that you try the solutions provided in this article.
Table of Contents
Causes of the HP Printer Error Code 0x83c0000a
The following are the causes of the HP printer error code 0x83c0000a:
i. Your printer is not receiving a printing signal
ii. The printer has been overused
iii. Hard drive problems
iv. Outdated printer driver
v. Wear and tear of the printer hardware.
If your HP printer is displaying any other error code apart from the HP printer error code 0x83c000a, read this article: HP Printer Errors and Solutions [Detailed] to learn how to resolve the error.
Signs of the HP Printer Error Code 0x83c0000a
The following are signs of the HP printer error code 0x83c0000a:
i. The error code 0x83c0000a is displayed on your printer’s control panel.
ii. Your HP printer is not printing
iii. The screen of the computer connected to your printer becomes blue.
Solutions to the HP Printer Error Code 0x83c0000a
To fix the HP printer error code 0x83c0000a, do the following:
1. Ensure that your HP Printer is Receiving Proper Power Supply
Confirm that your HP printer is receiving adequate power supply directly from the electric wall outlet. If your printer is not connected directly to an outlet, then you need to reconnect it.
2. Reset your HP Printer
To reset your HP printer, click on this link: HP Printer Errors and Solutions – HP Printer Error Do Not Use Setup Cartridges and then follow the instructions under the “Reset your HP printer” subsection
3. Remove and Reinstall your Printer’s Ink Cartridges
According to your printer’s design, open the printer door and take out the cartridges. After that, reset your HP printer using the instructions shared in the link above. Reinstall the cartridges back into your printer.
If the HP printer error code 0x83c0000a is not resolved after doing the above, do the next solution.
4. Update the Firmware for your HP Printer
Updating the firmware of your printer is another way to resolve this error. To update the printer firmware, we recommend you click on this link: HP Printer Errors and Solutions – How Do I Fix the Printhead Error on my HP Printer, and then follow the instructions we shared under the “Update your Printer Firmware” subsection.
If the HP printer error code 0x83c0000a is not resolved after doing the above, do the next solution.
5. Update your HP Printer Driver
Go to the HP website and download the latest driver for your HP printer. Once it is downloaded, install it on your computer.
HP Printer Error Code 0x83c0000a FAQs
How do I Fix oxc19a0020?
To fix the oxc19a0020 error on your HP printer, do the following troubleshooting steps:
Step 1
i. Remove the USB cable connected to your HP printer while your printer is on.
ii. Open the cartridge access door.
iii. Take out the ink cartridges from your printer.
iv. Close the cartridge access door and leave your printer on.
v. Wait for the “insert ink cartridge” message to be displayed.
vi. Disconnect the power cord from your HP printer.
vii. Wait for about 60 seconds before connecting the power cord back to your printer. If the printer doesn’t power on automatically, press the printer’s power button to turn on the machine.
viii. Reinsert the ink cartridges into your printer.
ix. Close the cartridge access door.
x. Print a calibrated page.
xi. Reconnect the USB cable to your printer and computer.
Check if the error is resolved, if it is not, do the troubleshooting step below.
Step 2
i. Turn off your HP printer.
ii. Take out the ink cartridges from your printer.
iii. Check for residual tapes in the cartridges; if you find any, remove them.
iv. Clean any residual ink on the cartridges or printer with damp cotton swabs.
v. Check the cartridges for any form of damage. If any of the cartridges are damaged, replace them with a genuine HP cartridge.
vi. Disconnect the power cord for about 1 minute before reconnecting the power cord.
vii. Turn on your HP printer.
Check if the error is resolved, if it is not, do the troubleshooting step below.
Step 3
i. Turn off your HP printer.
ii. Disconnect the power cable from your printer.
iii. Open the cartridge access door.
iv. Take out the cartridges.
v. Clean the cartridges with a damp fluff-free fabric. The fabric should be damped with distilled water only. While cleaning, gently clean the area that is copper-colored.
vi. Wait for about 10 minutes to allow the ink cartridges dry.
vi. Reinsert the cartridges into the right slots in your printer.
Check for the error. If the error persists, contact HP Support for further assistance.
