This article will guide you on how to fix the HP printer error 0x61011beb within minutes.
Causes of the HP Printer Error 0x61011beb
This HP printer ox61011beb error is caused due to the following reasons:
i. Improper alignment of your ink cartridges
ii. Miscommunication between your HP printer and the ink cartridges
iii. Change in printer settings
iv. Corrupted drivers
We recommend that you read this article: HP Printer Errors and Solutions [Detailed] to learn how to resolve other HP printer errors that you might likely encounter.
Solutions to the HP Printer Error 0x61011beb
To fix the HP printer error 0x61011beb, try the following solutions:
1. Reinstall Your HP Printer’s Ink Cartridges
How to reinstall your HP Printer’s Ink Cartridges
To reinstall your HP printer’s ink cartridges, do these steps:
Step 1: Turn your HP printer on.
Step 2: Remove your printer’s USB cable from your computer if there is any connected.
Step 3: Take out the cartridges carefully.
Step 4: Unplug the power cord from your printer.
Step 5: Wait for at least a minute before turning your printer on. Therefore, plug back the power cord and press the printer’s power button.
Step 6: Wait for some seconds to allow the printer to display the “Insert Cartridges” message.
Step 7: Reinstall the ink cartridges into your printer. Ensure that they are firmly placed in their respective slots.
Step 8: Close the printer’s access doors.
Step 9: If a message to recalibrate is shown, simply allow your printer to carry out the process.
Step 10: Reconnect your USB cable to the computer.
Step 11: Try to print a document.
If it prints, then the error has been resolved.
However, if the document fails to print, move to the next solution.
2. Update your HP Printer Driver
To update your printer driver, go to the HP website, search for your printer model, and then download the full/basic driver. After that, install it on your computer.
3. Remove Registry Errors
To remove registry errors, simply download and install an app for registry cleaning on your computer. You can check online to find any reputable cleaner. Once you’ve installed the app, run the registry cleaner to clean any error in your computer’s registry.
HP Printer Error 0x61011beb FAQs
How do I Fix Printer in Error State?
To fix a printer in error state, do the following steps:
i. Make sure that the connection between your printer and computer is okay.
ii. Restart your printer.
iii. Confirm that the ink or toner in the cartridge is sufficient. If it is not, you have to replace the cartridge.
iv. Make sure the paper you want to use is the right size, type, and quality that is compatible with your printer. The paper settings of your printer must also match the paper in use.
v. Reinstall your printer drivers.
vi. Ensure that the print spooler startup type is set to “Automatic”.
vii. Update your computer’s operating system version.
Note: You should only move to the next troubleshooting step if the previous one didn’t get your printer out of the error state.