HP Printer After Firmware Update [Issues & Proven Solutions]

In this article, we’ll provide you with solutions to HP printer after firmware update issues.

HP Printer After Firmware Update

From PxHere


HP Printer After Firmware Update Problem

Having troubles with your HP printer after a firmware update? We have got your back! Follow these simple steps to resolve the issue.

Restart Your Printer

Restarting your printer can sometimes fix minor glitches that might have been caused by the firmware update. Turn off your printer, wait for about a minute, and then turn it back on.

Check the Printer Status

Ensure that your printer status is not offline or paused. If it is, change the status to online or unpause it.

Set as Default Printer

Go to your computer settings and ensure that your HP printer is set as the default printer. If not, make the change.

Run HP Print and Scan Doctor

HP Print and Scan Doctor is a free tool provided by HP to diagnose and resolve printer issues. Download it from the HP website and follow the prompts to fix your printer.

Reinstall Printer Drivers

If the problem persists, you might have to reinstall your printer drivers. Go to the HP website, download the latest drivers for your printer model, and install them on your computer.

Downgrade the Firmware

In some cases, the firmware update might be the problem. You may need to downgrade to a previous version. You can do this by downloading a previous version of the firmware from the HP website and installing it.

Contact HP Support

If all else fails, your best option might be to contact HP Support. They have a team of professionals who can help diagnose and fix the issue.


HP Printer Not Recognizing Print Head After Firmware Update

Running into a situation where your HP printer doesn’t recognize the print head following a firmware update? This guide is here to help you out.

Perform a Hard Reset

Begin by performing a hard reset on your HP printer. Turn it off, unplug it from the power outlet, wait for about a minute, and then plug it back in and turn it on.

Reinstall the Print Head

Turn off the printer and remove the print head. Clean the print head carefully with a lint-free cloth, and then reinstall it. Turn the printer back on to check if the problem has been resolved.

Check for Firmware Updates

Visit the HP support website to see if there are any recent firmware updates for your printer model. If there are, download and install them.

Clean the Print Head Contacts

Turn off the printer and remove the print head. Clean the contacts on the print head and inside the printer with a lint-free cloth.

Reset the Printer to Factory Settings

If the printer still does not recognize the print head, try resetting the printer to its factory settings. You can find the steps to do this in your printer’s user manual.

Contact HP Support

If you’ve tried all these steps and the issue persists, it’s time to reach out to HP Support. They can provide more specific guidance for your printer model.


Check out these other related articles…

HP Printer Problems After Windows 10 Update: Sure Solutions

HP Printer After Mac Update [Issues & Solutions]

HP Printer After Microsoft Update [Issues & Solutions]

HP Printer Not Working After Windows Update: Sure Fixes

HP Printer Supply Problem After Update: Issues & Sure Fixes


HP 6600 Printer Quit Working After Firmware Update

Having an HP 6600 printer that stopped working after a firmware update can be frustrating. This guide will walk you through the steps to get it back up and running.

Restart Your Printer and Computer

The first step is always to restart your printer and your computer. This simple action can sometimes solve the problem as it refreshes the systems and clears any temporary bugs.

Check the Printer Connection

Ensure your printer is properly connected to your computer. If it’s wireless, confirm it’s connected to the same network as your computer. For wired connections, check that the cables are properly plugged in.

Roll Back the Firmware Update

If your printer stopped working right after a firmware update, it might be the update causing the issue. Rolling back to the previous firmware version can help. You can find the previous firmware version on the HP support website.

Update the Printer Driver

Printer drivers ensure your computer communicates effectively with your printer. If they’re outdated, your printer might not work. Visit the HP support website, search for your printer model, and download the latest driver.

Check the Print Queue

If there are too many pending tasks in the print queue, it might cause your printer to stop working. Open the printer’s settings, check the print queue, and clear it if needed.

Perform a Printer Reset

If the problem persists, you may need to perform a factory reset on your printer. This will restore your printer to its original settings. Please refer to your printer’s manual on how to do this.

Contact HP Support

If none of the previous steps work, it’s time to reach out to HP Support. They have the expertise to provide specific solutions that might be beyond general troubleshooting steps.


HP P1102w Printer Not Working After Trying to Update the Firmware

If your HP P1102w printer is not working after a failed firmware update, a reset might be necessary.

First, turn off your printer. Disconnect the power cord from the back of the printer, then wait for about 60 seconds. After this period, reconnect the power cord and turn on the printer.

Once it’s back online, revisit the HP website and download the appropriate firmware update. Make sure the printer is connected to the computer during this process, then execute the firmware update file and follow the instructions to install the new firmware.


We recommend you read this article: HP Printer After Update [Issues & Proven Solutions] to learn how to deal with other HP printer issues that might occur after an update.


HP Printer Update Hangs After Installing Firmware

If your HP printer update hangs after installing new firmware, it may need a hard reset.

Turn off the printer, unplug it from the power source, and wait for about 60 seconds. After this, reconnect your printer to the power source and turn it on.

Once your printer is back online, try the update again. Ensure you’re using a reliable internet connection and that your printer is properly connected to your computer.

If the problem persists, reach out to HP’s customer support for further assistance.